Kolibri KM-300 PP pontoon is made of 5-layer PVC material, which ensures tightness. The material is resistant to UV radiation, gasoline, oils and salt water. It retains its properties at temperatures ranging from –30 to +60 degrees Celsius.
The seams were made using the contact method with additional reinforcement of the outer and inner sides. A two-component polyurethane adhesive is used to glue the seams. The sides of the boat have partitions, which were made in the shape of cones, in order to equalize the pressure in the cylinder chambers.
The pontoon is equipped with safety valves that regulate the pressure in the chambers. They minimize the risk of damage or rupture of the pontoon chambers. In addition, a more practical and convenient paddle mount has been used, so you can easily adjust the length of the paddle and adjust it to your preferences, without weakening the paddle tube.
The floor was made of waterproof plywood boards, and the sections were connected using tapes that are permanently glued to the floor slabs. The model of the Kolibri KM-300PP pontoon does not contain a keel.
It is worth noting that in the Kolibri KM-300 PP pontoon it is possible to adjust the benches, an additional benefit is a higher point of bench embedding. The pontoon does not have profiles, because there is no need to block individual sections of the floor, they are "clamped" by inflated sides.
The pontoon is CE certified for safety.
Specifications:
- length 300 cm
- width 160 cm
- side diameter 42 cm
- number of air chambers 3 pcs
- outboard engine power 8-10 HP
- maximum load 400 kg
- weight 45 kg
- maximum number of passengers 3 persons
- floor dimensions 75cmx50cmx10cm
- dimensions of packed pontoon 120cmx50cmx45cm
The set consists of:
- aluminium oars
- 2 benches
- full floor
- Football push-ups
- transport bag
- repair kit
- safety rigging
- engine transom
- paddle holders